Everybody who has problems with the VCD partition (which sometimes makes the disk useless, like mine which I want to use it as a PVR in a TV decoder, as I explain in another post) please vote and ask WD to remove PERMANENTLY the VCD partition.
Just sign in and vote.
Maybe WD would finally consider to respect its customers opinion and requirements.
I bought a 750GB external harddrive ( my book essentials) at the end of May, 2010.
I have been in 'phone and email ' contact with WD staffers to try and fix a fundamental issue...that of update firmware and software for this Ext. HD......no success in updating either firmware OR software OR getting the smartware installed to even do the auto backup. I am now in "drag and Drop" mode which is working..but no use of Smartware.
I have a Windows Vista 32 bit o/s which is operating very well. The advice I get from WDJeremy is to adjust the settings in Windows to see if this works.
My suggestion to WD is for you to talk to your technical staffers and FIX what is wrong with the "firmware and Smartware update" process for "My Book Essentials".
Updating software with any other Software Co is not a problem..but for some reason, WD has big issues with updating its software for its users.
Please fix the problem so that the update process is as simple as any other software update....this is not rocket science...
WD did a masterful job at " marketing" the "easy to use" external HD using smartware...but it does not work for many a user after the initial backup...Please look at my file as I'm registered and there are a multitude attempts documented to fix the problem but without success.
I'd like to request that the new My Passport Studio 2Tb external drive's USB 2.0 port be upgraded to a USB 3.0 one. I'd like to buy this for use with my PC and prefer the aluminium case to the black plastic one for the My Passport 2Tb. I'm really surprised the new Studios were released witha USB 2.0 port in the first place, since the new Intel chipsets with on-board USB 3.0 mean that it's highly likely that the new round of MacBooks will have USB 3.0 ports. Thanks for reading this!
I don't really get the difference in pricing for MyPassport PC and Mac. It's the same drive, the Mac version is slightly more expensive, but the PC version is compatible with usb 2.0 and usb 3.0 and the Mac version is not...
The thing is, not only will next Mac releases have usb 3.0 implented when Ivy bridges comes out but also Thunderbolt is on all Mac and coming rapidly to recent PC ultrabooks, WD hard drives or at least the MyPassport for Mac should be Thunderbolt ready and have the adequate slot.
Plus it makes MyPassport Studio clearly obsolete : nobody serious about Video/Graphic/Audio production and editing, and who uses a Mac, continues to use Firewire, which is clearly a dying interface. It really is about Thunderbolt and I hope the next WD will be compatible because it's going to be REALLY quickly adopted by users compared to eSata or even usb 3.0.
In short : make the next MyPassport for Mac (and PC is a safe bet) with a micro-usb 3 and a thunderbolt port (and they are about the same size).
Disable SES when no password protection is used on the drive, so Windows does not try to install the device driver. It can be seen as a problem when the drive is connected to a PC of an other person or company. Also there is an unnessesary delay because Windows starts looking for the SES device driver, that was not found automaticly on any of my systems.
I think it is important for iPhone users to be able to download photos/video directly into the iPhone's Camera Roll from the My Passport Wireless. Actually, I think it is essential for iPhone users to be able to do this.
I know that iPhone users need a place to put there photos and uploading them to the My Passport Wireless is a great solution. But they want to be able to retrieve them from their My Passport and use them on their phones. They have to go back into the Camera Roll for that to happen.
The main issue that I have with my passport wireless is the fact that it doesn't discriminate from who's connected to it, so the whole files are available to whoever is connected at any given time, of course you would think that if a user has access to it is because they know the password for its wifi, but in the case that you want to share drive space temporarily with someone as in a trip for example then this user would have access to all your files, even further if I have it connected to my home network the whole family would have access to it but what if there are some sensitive files that I don't need my family to be tampering with? but I still want to provide access to my kids to their movies and family photos? it looses the purpose of a personal data storage when you focus so much on sharing, I want to be able to decide what I want to share and what not. Also you need to update the iOS app... it **bleep** on iphone 6+
Currently, external drives such as WD MyBookDuo or WD MyPassport can not be "unlocked" and used on Linux or other operating systems other than Windows and Mac.
There are many Linux users that would appreciate some support from WD, and if WD would simply provide the information/api etc needed, they do not even have to create the actual Linux tool themselves, the user community will.
Ideally, the UNLOCK tool should be open sourced so that we may create unlockers for any operating system we choose to use.
Our company has switched from Mac to Windows for video editing and motion graphics. The project files are huge and require a lot of bandwidth. We do a lot of the work on a very well spec'd HP workstation, but also have the need to work offsite and use a Lenovo workstation laptop. Both are equipped with Thunderbolt.
It seems a lot of the professional video editing work is moving to Windows. This small, portable RAID would be great for our needs, but currently is only available as a Mac formatted drive.
Would love to see it available as an NTFS formatted RAID0.