Reply
Senior Member
RayHs
Posts: 1
Registered: ‎12-13-2010
0

Throughput Reduction

I'm using 3 WD Livewire boxes and am experiencing a throughput reduction over time to 5-7 Mbps sustained which can be reset by un-powering and re-powering the Livewire box at the pc experiencing the throughput reduction. This immediately resets the throughput back up to to >20 Mbps sustained. I suspect the throughput reduction is occurring when there's simultaneous traffic between all 3 Livewire boxes and it's not resetting itself upwards when the traffic reduces.
Community Manager
Bill_S
Posts: 5,926
Registered: ‎11-24-2009
0

Re: Throughput Reduction

That sustained throughput is not unusual.  Windows will grab a quick a look at speed, and then it will appear high.  But once a sustained transfer kicks in, you will see the actual transfer rate.

 

Your assessment is pretty accurate.  When there's simultaneous network activity going on, you will see transfer rates drop.  Also keep in mind, that you are operating on an electrical circuit.  Any appliances can create noise on the line, causing throughput to slow down.  I have similar devices in my house, and too much appliance and simultaneous network activity can drop our connection to the internet. 


Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.
Forums | Ideas | News and Announcements | Register | Sign in | Help | Forum Guidelines
Copyright © 2001 - 2010 Western Digital Corporation, All rights reserved. | Trademarks | Privacy | Terms of Service | Terms of Use | Copyright | Contact WD