06-29-2010 02:17 PM
I felt like I should post this since it took me hours upon hours to figure out a solution with absolutely no help from this forum. So I hope this helps someone...
I purchased the WD HD Live Plus about a week ago and was not able to get it working properly for the first 2-3 days. It turned out that I needed to tweak a setting in my router in order to get anything that was watchable to stream to my device over a wired connection. I have a cat6 cable running out of my router, into my WD TV Live Plus, then an HDMI cable and a digital audio cable going from the WD into my receiver. All of the network settings, video settings and cables were configured correctly, but it still was not working. In the end, what worked was logging into my router (which for most people would be 192.168.1.1) and going into 'Advanced+' -> 'Quality of Service (QoS) -> 'Traffic Priority' and adding QoS input and output rule that changed the traffic priority for any traffic in or out of the WD to "Priority 7-High". Once I did that, the WD device worked like a charm.
07-01-2010 03:10 PM - edited 07-01-2010 03:11 PM
I'm curious what kind of router this is.
QoS policies "generally" are only enforced when you're going through the ROUTER to the INTERNET, not between different switch ports.
There are some (fairly advanced) switches out there that have priority queuing available on the switch ports, but not many...
07-01-2010 03:16 PM
Oh, never mind. You did say FiOS, so I'm guessing this is an ActionTec router, which is rather advanced, but I don't believe it has ANY method of controling QoS on the switch ports.
Where you only having problems with Internet stuff like YouTube or whatnot? Or were you having problems accessing local content?
07-01-2010 08:16 PM
07-01-2010 08:38 PM - edited 07-01-2010 08:38 PM
Yeah, I don't disagree... But, usually QoS settings only are applied when crossing a router interface.
I'm a CISCO certified pro, so I don't claim to be an expert on ActionTec, but on a Cisco box, those settings would be ignored by the switch.
I'd love to see your screen scrapes. Curious what you've done! (I have FiOS, too, but I don't use the switch.)
07-04-2010 09:37 AM - edited 07-04-2010 09:38 AM
I'm Cisco certified too, but as you know, Cisco has their own way of doing things that consumer router manufacturers probably don't incorporate into their products. Here's the shot...
I actually changed the setting to 6 because 7 is supposed to be reserved for critical traffic...not that it probably matters much on my 10 node home network.
07-04-2010 10:21 AM
Gotta wait for the moderators to approve your pics...
So, you're actually running so much other data through the switch that this makes that big of a difference, huh?
07-04-2010 10:49 AM
No, that's the strange part and why it took me so long to figure out the solution. I didn't think that there was a bandwidth issue, but when I changed the priority everything seemed to work the way it was supposed to.
10-03-2010 08:40 PM
I just bought my WD TV LIVE PLUS a few days ago and have been using it wired directly to my Verizon Fios ActionTec router and my external HDD which is usually for back up purposes only.
I have the Fios ActionTec MI424-WR rev. E.
I want to move my WD LIVE+ to my entertainment center in the liveroom and need to connect wirelessly.
What is the BEST way to do this using my ActionTec MI424-WR rev E router?
Thank you for assistance in advance!