Unable to obtain an ip address

[ForgeNZ]

5 minutes ago

Gday

I am also having problems obtaning an ip address.

My router is a Netgear DGN2200 using WPA PSK TSK and WPA PSK  AEK combination. 

Tried entering manually but that didnt seem to work

can you tell me whar settings to use manually ?

Thanks

Hardware Version	DGN2200
Firmware Version	V1.0.0.36_7.0.36
GUI Language Version	V1.0.0.25
Internet Port
MAC Address	20:4E:7F:C2:1B:B7
IP Address	60.228.248.34
Network Type	PPPoA
IP Subnet Mask	255.255.255.255
Gateway IP Address	172.18.113.33
Domain Name Server	61.9.242.33 61.9.226.33
LAN Port
MAC Address	20:4E:7F:C2:1B:B6
IP Address	192.168.0.1
DHCP	On
IP Subnet Mask	255.255.255.0
Modem
ADSL Firmware Version	A2pB025c1.d21j2
Modem Status	connected
DownStream Connection Speed	17554 kbps
UpStream Connection Speed	1020 kbps
VPI	8
VCI	35
Wireless Port
Name (SSID)	NETGEAR94
Region	Europe
Channel	Auto (1)
Mode	Up to 145 Mbps
Wireless AP	On
Broadcast Name	On

[ForgeNZ]

Gday

I am also having problems obtaning an ip address.

My router is a Netgear DGN2200 using WPA PSK TSK and WPA PSK  AEK combination. 

Tried entering manually but that didnt seem to work

can you tell me whar settings to use manually ?

Thanks

Hardware Version	DGN2200
Firmware Version	V1.0.0.36_7.0.36
GUI Language Version	V1.0.0.25
Internet Port
MAC Address	20:4E:7F:C2:1B:B7
IP Address	60.228.248.34
Network Type	PPPoA
IP Subnet Mask	255.255.255.255
Gateway IP Address	172.18.113.33
Domain Name Server	61.9.242.33 61.9.226.33
LAN Port
MAC Address	20:4E:7F:C2:1B:B6
IP Address	192.168.0.1
DHCP	On
IP Subnet Mask	255.255.255.0
Modem
ADSL Firmware Version	A2pB025c1.d21j2
Modem Status	connected
DownStream Connection Speed	17554 kbps
UpStream Connection Speed	1020 kbps
VPI	8
VCI	35
Wireless Port
Name (SSID)	NETGEAR94
Region	Europe
Channel	Auto (1)
Mode	Up to 145 Mbps
Wireless AP	On
Broadcast Name	On

[zebra9]

Is there a good signal between the router and WD Lite TV?

Normally it should be detected fine with Auto search configuration.

Else:

Have you tried WPA2, or to disable security?

Is there any mac filtering rules in router config?