6TBS FULL (NOT 5800TBS MANU FACTURE MAKE THE HARDRIVES INCOMPLETE FIX THAT
4 CORE OR 8 CORE PROCCESING TO PREOCESS THE DATA MORE FASTER STABLE FOR GAMING AND BETTER STAVILITY AND FAST TRANSFER SPEED = THIS IS THE HARD DRIVE CORES
6GBS/S OR 12GBS/S
CHACHE 128MBS OR 512MBS OR MORE
and turbo technology
and a new desing for the hard drives
this is just a idea thank you .............for gamers
Please make the WD Black2 Hybrid SSHD Drive Mac compatible.
I'd buy one right away!
WD Dev Department,
As stated in this thread:
we would like to have these drives models with a non-emulated firmware
that exposes the 4K sectors directly to the OS.
The thing is that many Linux distros and Unix flavors already have support for that kind of disks and the 512-byte emulation is only presenting complications when trying to use the disk as is, thus forcing us to align the partitions to the correct underlying layout.
If the first goal of the emulation would be compatibility to actual or legacy OS's, then there should be no need of it if the OS is already prepared to manage the 4K sectors.
In fact, you could have the a jumper setting to activate the 512-byte emulation starting at LBA sector 64 and another setting to have the disk exposed with non-emulation at all and showing the real thing.
Just a thought that could make our lives a little easier in the *nix world.
Leandro Vanden Bosch.
I'm looking to replace a 2008 velociraptor that has served me really well over the years and still does.
Doing my research i found the last product refresh was in 2012, I have a hard time believing WD has been sitting still and those models still have in them the best WD has to offer today..
So, if at all possible please poke an engineer and have Her/Him make a modern reliable and fast drive worthy of the name Raptor. No nand though!
Some time ago another manufacturer produced a HD that was high capacity and low cost. They took a 3.5" mechanism and jacked it up with 5.25" platters. It worked well, but was slow for small file sizes because of the not-so-fast track access time and a (relatively) low rotation speed. For large files the performance was good because it didn't have to move to another track very often. I thought it was not as much capacity as it could have been because it was thinner than its half-height 5.25" form factor mounting. There was room for another platter or two in the mounting space.
Another HD I had at work 'way back in the early days was large for its day; it had something like eight platters in a full height 5.25" form factor. The neat idea in that one was that the spindle motor was inside the hub, not below the platters. That let them get more platters in the vertical space.
Now: What would be the capacity of a HD that used ALL the half-height 5.25" form factor, and had the motor in the hub? If they can make 4TB in a 3.5" form factor what could they do in a box the same size as a CD/DVD drive? 100T ??
This drive WD Blue 1TB WD10JPVX with Firmware Revision: 01.01A01
required new firmware to fix hard disk drive spinup and spindown which addresses drive noise and intermittent freezing/stuttering.
Spinup and spindown like crazy every few seconds, and freeze all apps before spinup.
It woulde be nice, if you can support the Windows Server (especially the Essentials Edition) in the Install program (Setup) for the Black2 Dual Drive.
Windows Server 2012R2 is based on the same kernel as Windows 8.1 is. So therefor the drivers should be already there, but unfortentatly the Installprogram cancels the installation at the moment with Error Code 52 (unsupported Windows version).
This drive is in my opinion perfect for a small, economic homeserver (with Server 2012R2 Essentials), so please add support for Windows Server to the WDBlack2 setup program).
Thank you already!
It should be easy to find out if an advanced format drive has been aligned or not.
So far I cannot find a way to do this.
Reasons why this would be helpful.
1. User might have forgotten if a drive was aligned for XP or not.
2. Buyers of used drives might need to know.
3. After using certain tools, or partitioning, etc., users might want to do a "sanity check" on the alignment state.
On every hard drive in the world today there is always a Metal cover obscuring the internal workings of a hard drive.
How about a Clear Lexan or Heavy grade plexiglas cover On top and Place smaller more visible labelling on the cover with a see thru labelling system.
Make it available in several UV Light reactive colors giving the User the ability to see How a drive really works while giving the End users some splashes of colors This would in a few ways allow education into the technology of How a hard drive works and give the power Gamers Something to show off other then a Liquid cooling system.
this Can be a Limited Edition Hard drive depending on the applications for use.
the Velociraptor Drive was a start in the right direction But now is a time where the end User should have a say in the colors and the beauty of WD Design and Reliability.
the Plastic Covering can be sealed like the Metal plain tops in Use today I hope WD does take this into consideration and Puts this Design into Production Just like the MY BOOK This would be a very popular design and would increase Sales.
WD drives used to be known for being fast, quiet, and reliable.
It seems WD is removing AAM from some of it's later HD's (including green drives?). Perhaps this is due to a patents issue (?) but it would be better to allow the user to set a 'Quiet Seek Option' programmed in by WD rather than remove the ability entirely. The quiet or fast mode could be set via a small software utility downloadable from WD's support site.
We have recently bought three WD1502FAEX drives. We bought them for reliability rather than speed (5-year warranty implies more reliability). But they are as noisy as heck when seeking (or even when doing seeks during idling) - they sound like a coffee percolator next to you all day long - and apparently they do not have AAM in their feature set so we can't set them to 'quiet'.
For all of your customers who are already affected by noisy WD drives (search this forum), please bring out a firmware upgrade to enable AAM (or some sort of quiet seek) so we can set them to quiet - otherwise we have another 5 years of listening to coffee percolators all day long.
You might also make it clear in your product specifications which drives have/do not have AAM (or quiet mode) available - I can find no mention on your website, so at present it's a case of buying the drive(s) and then finding out.
If you like the HD's to compete with current SSD's, at least for the short tem, you may want to have a double, triple or quad actuator arm in a small 2.5 factor disk. With a smarter controller, you could have the benefit of deciding to use them all for reading, writing, or a combination of reading and writing at the same time.
Rotational Latency will be divided between the arms
Translational latency will be minimized if the design allows for smart predictive landing zone of each arm - whichever is closer to the data can access it.
Putting various arms like this will probably behave better than current RAID arrangements, since the internal architecture will not be limited to a static RAID layout (it's the same physical disk!), but will be smarter since it will know when all heads will be reading (possibly from same cylinder if necessary), writing or doing both and deciding when the arms should execute the operation.
This does not change the current technology at the low level: it merely parallelizes a proven solution, and makes it smarter.
If you add a bigger buffer to the disk, it will be hard to beat.
It would be very nice for laptop users to have high capacity 2.5 HDDs with PATA interface available. At the moment the maximum capacity is 320 GB (no change since two years here). Since the first 2.5 HDDs with 500 GB per platter start to be available now, 1000 GB drives (with 2 platters, 9.5 mm height) should not be a problem. Older laptops that can handle 320 GB will be able to handle 1000 GB and many people - like me - are quite satisfied with older hardware they bought for a lot of money some years ago (especially true for IBM laptops). However, HDD space is always a problem.
I would like to exchange my 2.5 PATA 250 GB WD HDD against a 1000 GB model :-)
A friend of mine recently installed a new, greater capacity power supply into his computer and when powering it up, found that the new power supply had blown all four of his hard drives. When he contacted a vendor regarding data recovery, they commented that WD drives, unlike Seagate's drives, are not shielded from this type of mishap with a metal shield, but instead use a foam divider that melts but provides no protection for the drive circuitry. Needless to say, the foam divider on all four of his drives was indeed melted.
Is it possible to place a shield/protector on the drive to protect from such an occurrence? With more and more larger capacity power supplies, this will become a greater possibiltiy.
Just two ideas:
Simil RAID-4 or RAID-5 architecture within platters drive to improve reliability of entire drive.
When one sector of "simil array" did fails, it can be reallocated without data loss.
Pro: more reliability, more read speed, relatively simple implementation with minumum of 3 heads/2 platters.
Cons: more complexity firmware and processor/controller , less amount of data avalaible, less write speed performance.
Single arm with two "L-shaped" or "Y-Shaped" head to minimize access time.
When the requested sector is in the first half of the drive , data was readed from "sub-head 1" otherwise from "sub-head 2".
Pro: half average access time, relatively simply firmware implementation.
Cons: more head complexity and weight, solve problem with head parking.
Thanks & Bye
The recently released SiliconEdge Blue SSDs sound good, but what I'd really love is for a Black version to come out that has a 5-year warranty and utilizes the less-expensive SandForce controllers. A 100-200GB with a reasonable price point?
The JMicron controllers aren't really doing it for me, especially at the current price points.
I thought at first that SiliconSystems' IP and tech would be incorporated...but the Blue turned out to be a JMicron...why?
Help us make your ideal products
Let us know how to make our products meet your needs.
Join the CREW at crew.wdc.com
Help us by:
Referral Code: WDCOMM